SVO-10T Turbo Hi-Vac Oven
SVO-10T Turbo Hi-Vac Oven

Cascade TEK

SVO-10T Turbo Hi-Vac Oven

 
Capacity

10.0 cu. ft.

Interior Dimensions WxDxH in.

28.5" x 24" x 24.5"

Exterior Dimensions WxDxH in.

36.25" x 45" x 70"

Volts

208V-230V

Hertz

50/60Hz

Amps

20 Amps (30 Amp Service)

Weight

1600 lbs.

Temperature Range

-100°C to +220°C with thermal platen

TURN-KEY HIGH VACUUM OVEN FOR BAKE-OUTS IN 10^8 TORR RANGE

The SVO-10 TURBO is a fully automated, hi-vac drying oven built to execute your unique bake-out or drying process. Ideal for space/flight hardware, connectors, or any vacuum process requiring vacuum in the “hi-vac” ranges between 1 x 10-4 to 10-6 torr. Our thermal platen allows temperatures from -100°C to 220°C. Cascade TEK integrates the appropriately sized roughing pump (dry or wet) and turbo-pump to minimize process time in our largest 10 cubic foot 304 stainless steel vessel.

AUTOMATED VACUUM PROCESS FOR EASY OPERATION

The SVO-10-TURBO control system is designed for simple push button execution of your vacuum drying process. Simple, touch screen control automates the opening/closing of the vacuum valves, temperature profiles, nitrogen purging and vent sequences. Vacuum levels are displayed digitally with full measurement ranges in mTorr & Torr. Independent overtemp protection serves as a failsafe for your product inside the oven. Software provided allows for easy modifications should your vacuum oven drying process change over time.

RESIDUAL GAS ANALYZER (RGA) FOR PRECISION VACUUM DRYING

How do you know when your product is truly done outgassing to the appropriate level? The optional RGA identifies and measures the properties outgassing from your product during the vacuum drying process. By incorporating an RGA into a vacuum drying oven, it’s possible to better determine when a part is sufficiently outgassed. This is a great help for identifying the appropriate end point in the vacuum drying process, especially when dealing with inconsistent batches where residual moisture, gas and contamination levels may vary from one batch to the next. The Residual Gas Analyzer can be integrated into the SVO-10-TURBO.

DATALOGGER CAPTURES OVEN TEMP, VACUUM LEVEL & PART TEMPERATURE DURING PROCESS

We can install a multi-channel datalogger that displays temp, vacuum and even part temperature(s) during the vacuum drying process. In a clean room, Remote viewing allows the operator to watch the action without having to “suit-up”.