Ai 100L Non-Jacketed Glass Reactor with 200°C Heating Jacket

Free Freight Available!

Email this page:

Ai R100 series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed.

Features

  • No more expensive heating circulators, no more messy heat transfer fluid, adapters and tubing. Introduing the new Ai ReactorHeater 200°C heating jacket with temperature controller.

    Ai 100L ReactorHeater with temp controller

    • 200°C maximum temperature
    • 220V 50/60Hz 6,300 watts
    • Speedy heating
    • Ultra-thick insulation for minimum heat loss and very low outer jacket surface temperature
    • Built-in open/close viewing window
    • Easy installation, plug and play
    • Oven-temp protection, over-current protection
    • UL/CSA certified
    • Designed and made in the USA
  • UL 61010-1 and CSA C22.2 (optional)
  • Solvent-resistant PTFE on all sealing components ensures long time durability and operation.
  • All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.
  • Adjustable stirring rate provides great torque or high speed.
  • Patented PTFE stirring rod bearing for reliable and quiet operation.
  • Optional multi-layer stirring blades for optimal reaction results.
  • Large condenser cooling surface for exceptional condensation performance.
  • Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.
  • Easily visual operation with digital speed and temperature displays.
  • Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)
  • One year warranty and lifetime US-based parts, service, and support.

Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Specifications

 Model R10 R20 R50 R100
 Electrical requirements
110V 60Hz or 220V 50/60Hz, 1-Phase
 Power 90W 140W 250W
 Reaction glass vessel capacity
 2.6 gallons (10L) 5.3 gallons (20L) 13 gallons (50L) 26 gallons (100L)
 Cooling/heating jacket capacity 0.8 gallon (3L) 1.6 gallons (6L) 4.2 gallons (16L) 8 gallons (30L)
 Glass materialHigh borosilicate glass 3.3
 Rotation controllerDigital controller with variable frequency drive
Rotation speed: 50 to 500 rpm
 Maximum jacket pressure4.4 psi or 0.03 MPa
 Drain valveFlush seal design with large opening and flat flange clamp
 AgitatorAnchor design, type-304 stainless steel reinforced PTFE structure
 FunnelPressure equalizing
 Vacuum gaugeMechanical
 Swivel casterFour
 Glass vessel temperature range -110°F to 400°F
 Vacuum level< 700 torrs
 Vacuum sealingGlass or PTFE
 Drain port ground clearance 15 inches 13 inches 12.5 inches 13.5 inches
 Unit dimesions (WxDxH) 18 x 26 x 78″ 20 x 27 x 80″ 26 x 33 x 85″ 28 x 42 x 95″
 Shipping dimensions 24 x 67 x 26″ 24 x 75 x 31″ 25 x 83 x 42″ 26 x 88 x 45″
 Shipping weight 240 Lbs 262 Lbs 330 Lbs 460 Lbs
 Compliance UL, CSA, CE (optional)


Warning: call_user_func() expects parameter 1 to be a valid callback, no array or string given in /home/epsheatt/public_html/epsovens.com/wp-content/themes/h-code/woocommerce/single-product/tabs/tabs.php on line 65
  • This field is for validation purposes and should be left unchanged.